收藏本站
Data Sheet
Table 49. MMODE Registe r (Address 0xE700)
ADE7854/ADE7858/ADE7868/ADE7878
Bit
Location
1:0
Bit Mnemonic
PERSEL[1:0]
Default Value
00
Description
00: Phase A selected as the source of the voltage line period measurement.
01: Phase B selected as the source of the voltage line period measurement.
10: Phase C selected as the source of the voltage line period measurement.
11: reserved. When set, the ADE7854 / ADE7858 / ADE7868 / ADE7878 behave like PERSEL[1:0] = 00.
2
PEAKSEL[0]
1
PEAKSEL[2:0] bits can all be set to 1 simultaneously to allow peak detection on all three
phases simultaneously. If more than one PEAKSEL[2:0] bits are set to 1, then the peak
measurement period indicated in the PEAKCYC register decreases accordingly because zero
crossings are detected on more than one phase.
When this bit is set to 1, Phase A is selected for the voltage and current peak registers.
3
4
7:5
PEAKSEL[1]
PEAKSEL[2]
Reserved
1
1
000
When this bit is set to 1, Phase B is selected for the voltage and current peak registers.
When this bit is set to 1, Phase C is selected for the voltage and current peak registers.
Reserved. These bits do not manage any functionality.
Table 50. ACCMODE Register (Address 0xE701)
Bit
Location
1:0
Bit Mnemonic
WATTACC[1:0]
Default Value
00
Description
00: signed accumulation mode of the total and fundamental active powers. Fundamental
active powers are available in the ADE7878 .
01: reserved. When set, the device behaves like WATTACC[1:0] = 00.
10: reserved. When set, the device behaves like WATTACC[1:0] = 00.
11: absolute accumulation mode of the total and fundamental active powers.
3:2
VARACC[1:0]
00
00: signed accumulation of the total and fundamental reactive powers. Total reactive powers
are available in the ADE7858 , ADE7868 , and ADE7878 . Fundamental reactive powers are
available in the ADE7878 . These bits are always 00 for the ADE7854 .
01: reserved. When set, the device behaves like VARACC[1:0] = 00.
10: the total and fundamental reactive powers are accumulated, depending on the sign of
the total and fundamental active power: if the active power is positive, the reactive power is
accumulated as is, whereas if the active power is negative, the reactive power is accumulated
with reversed sign.
11: reserved. When set, the device behave like VARACC[1:0] = 00.
5:4
CONSEL[1:0]
00
These bits select the inputs to the energy accumulation registers. IA’, IB’, and IC’ are IA, IB, and
IC shifted respectively by ?90°. See Table 51.
00: 3-phase four wires with three voltage sensors.
01: 3-phase three wires delta connection.
10: 3-phase four wires with two voltage sensors.
11: 3-phase four wires delta connection.
6
REVAPSEL
0
0: The total active power on each phase is used to trigger a bit in the STATUS0 register as
follows: on Phase A triggers Bit 6 (REVAPA), on Phase B triggers Bit 7 (REVAPB), and on
Phase C triggers Bit 8 (REVAPC). This bit is always 0 for the ADE7854 , ADE7858 , and ADE7868 .
1: The fundamental active power on each phase is used to trigger a bit in the STATUS0
register as follows: on Phase A triggers Bit 6 (REVAPA), on Phase B triggers Bit 7 (REVAPB),
and on Phase C triggers Bit 8 (REVAPC).
7
REVRPSEL
0
0: The total reactive power on each phase is used to trigger a bit in the STATUS0 register as
follows: on Phase A triggers Bit 10 (REVRPA), on Phase B triggers Bit 11 (REVRPB), and on
Phase C triggers Bit 12 (REVRPC). This bit is always 0 for the ADE7854 , ADE7858 , and
ADE7868 .
1: The fundamental reactive power on each phase is used to trigger a bit in the STATUS0
register as follows: on Phase A triggers Bit 10 (REVRPA), on Phase B triggers Bit 11 (REVRPB),
and on Phase C triggers Bit 12 (REVRPC).
Rev. H| Page 95 of 100
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
EVAL-ADE7880EBZ BOARD EVAL FOR ADE7880
EVAL-ADE7953EBZ BOARD EVAL FOR ADE7953
EVAL-ADF4002EBZ1 BOARD EVAL FOR ADF4002
EVAL-ADG788EBZ BOARD EVALUATION FOR ADG788
EVAL-ADM1021AEB BOARD EVAL FOR ADM1021
EVAL-ADM1023EB BOARD EVAL FOR ADM1023
EVAL-ADM1031EB BOARD EVAL FOR ADM1031
EVAL-ADM1062TQEBZ BOARD EVALUATION FOR ADM1062TQ
相关代理商/技术参数
EVAL-ADE7880EBZ 功能描述:BOARD EVAL FOR ADE7880 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:* 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 主要目的:电源管理，电池充电器 嵌入式:否 已用 IC / 零件:MAX8903A 主要属性:1 芯锂离子电池 次要属性:状态 LED 已供物品:板
EVAL-ADE7880EBZ 制造商:Analog Devices 功能描述:ADE7880, ENERGY METER, 3 PH, SPI, I2C, E
EVAL-ADE7913EBZ 制造商:AD 制造商全称:Analog Devices 功能描述:3-Channel, Isolated, Sigma-Delta ADC with SPI
EVAL-ADE7953EBZ 功能描述:BOARD EVAL FOR ADE7953 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:PSoC® 主要目的:电源管理，热管理 嵌入式:- 已用 IC / 零件:- 主要属性:- 次要属性:- 已供物品:板，CD，电源
EVAL-ADF4001EBZ2 制造商:Analog Devices 功能描述:Evaluation Board For Pll Frequency Synthesizer 制造商:Analog Devices 功能描述:ADF4001 PLL SYNTHESIZER EVAL BOARD
EVAL-ADF4002EB1 制造商:Analog Devices 功能描述:EVAL BOARD - Bulk
EVAL-ADF4002EBZ1 功能描述:BOARD EVAL FOR ADF4002 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 主要目的:电源管理，电池充电器 嵌入式:否 已用 IC / 零件:MAX8903A 主要属性:1 芯锂离子电池 次要属性:状态 LED 已供物品:板
EVAL-ADF4007EBZ1 功能描述:BOARD EVALUATION FOR ADF4007EB1 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:PSoC® 主要目的:电源管理，热管理 嵌入式:- 已用 IC / 零件:- 主要属性:- 次要属性:- 已供物品:板，CD，电源